军事知识服务平台
纳米碳复合电镀Al2O3铜基复合材料的制备与腐蚀性能研究
Preparation and corrosion properties of nano carbon composite electroplating Al2O3 copper based composite materials
摘要 针对铜基复合材料在酸性介质中的耐电化学腐蚀性能差等问题,本文提出了一种表面与体相协同增强策略,采用电镀镍磷合金技术,对经多壁碳纳米管(MWCNTs)与零维纳米碳(CPD)协同增强的氧化铝铜基复合材料进行表面改性,并评估其腐蚀行为.在MWCNTs与CPD的最优配比为3∶1条件下,复合材料致密度达95.41%,电导率达94.52%IACS,腐蚀电流密度低至5.42×10-7 A/cm2,表明一维MWCNTs导电网络与零维CPD空隙填充效应实现了最佳协同增强效果;电镀增强后,Al2O3铜基复合材料的电导率达95.12%IACS,硬度达123.61 HV,断后伸长率为26.67%(拉伸强度258 MPa),均优于传统电镀工艺;电化学腐蚀性能测试表明,电镀增强Al2O3铜基复合材料腐蚀电流密度为3.186×10-7 A/cm2,金刚石增强铜基复合材料腐蚀电流密度为4.37×10-7 A/cm2),两者的差异较小,均表现出良好的耐电化学腐蚀性能.上述测试结果证实,电镀增强的Al2O3铜基复合材料具有良好的耐电化学腐蚀性,本方法为电子封装、海洋工程等极端腐蚀环境下的关键部件防护提供了有效的材料解决方案,有助于延长设备服役寿命,后续可考虑采用金刚石作为增强相,以利用其优异的导热性能进一步优化材料.
Abstract:
To address the poor electrochemical corrosion resistance of copper matrix composites in acidic media,this study proposed a synergistic surface-bulk reinforcement strategy.An electroless nickel-phosphorus plating technique was employed to modify the surface of alumina(Al2O3)copper matrix composites synergistically reinforced by multi-walled carbon nanotubes(MWCNTs)and zero-dimensional carbon nanodots(CPD),and the corrosion behavior of the modified composites was evaluated.Under the optimal MWCNTs-to-CPD ratio of 3∶1,the composite achieved a relative density of 95.41%,an electrical conductivity of 94.52%IACS,and a corrosion current density as low as 5.42×10 ⁻ ⁷ A/cm²,indicating that the one-dimensional MWCNT conductive network and the zero-dimensional CPD void-filling effect produced the optimal synergistic enhancement.After the plating reinforcement,the Al₂O₃ copper matrix composite exhibited an electrical conductivity of 95.12%IACS,a hardness of 123.61 HV,and an elongation at break of 26.67%(with a tensile strength of 258 MPa),all superior to those achieved by conventional electroplating processes.Electrochemical corrosion tests revealed that the plating-reinforced Al₂O₃ copper matrix composite had a corrosion current density of 3.186×10⁻⁷ A/cm²,while that of the diamond-reinforced copper matrix composite was 4.37×10⁻⁷ A/cm²;the small difference between the two indicates that both exhibit favorable electrochemical corrosion resistance.These results confirm that the plating-reinforced Al₂O₃ copper matrix composite possesses excellent resistance to electrochemical corrosion.This method provides an effective material solution for the protection of critical components in extremely corrosive environments such as electronic packaging and marine engineering,contributing to the extension of equipment service life.Future work may consider adopting diamond as the reinforcing phase to further optimize the material by leveraging its superior thermal conductivity.
刊 名 中国有色冶金 PKU
年,卷(期): 2026, 55(5)
分类号: TF125.2 TG174.2
机标分类号: TB332 TQ153.2 TG174.44
在线出版日期: 2026年11月6日
基金项目: ZS2025YB102:中华职业教育社规划课题,