军事知识服务平台
基于无因次采液指数的压裂裂缝注水增渗与窜流机理
Mechanisms of Permeability Enhancement and Fluid Channeling in Hydraulic Fractures via Dimensionless Liquid Productivity Index during Water Injection
摘要 低渗透油藏通常需依靠压裂技术实现增产,但压裂后形成的人工裂缝加剧了储层非均质性,易引发注入水窜流和油井快速水淹,导致原油难以有效动用,采收率偏低.为研究裂缝对低渗透油藏注水开发的影响,通过物理模拟实验,利用不同渗透率与裂缝长度岩心测得的油水相对渗透率曲线计算无因次采液指数和无因次采油指数,建立反映储层物性与裂缝长度对采液及采油能力影响的图版,并结合核磁共振成像技术揭示水驱剩余油分布规律.结果表明,裂缝具有增渗与窜流双重作用,在物性较差的低渗透储层中,裂缝能显著提升渗流能力,促进油水流动;但也加剧储层非均质性(裂缝与基质渗透率比值Kf/Km增大),导致注入水易沿裂缝窜流,无因次采液指数急剧上升,剩余油主要分布于岩心中部及裂缝两侧.对同一物性储层,裂缝长度增加会扩大其控制范围,提高驱油效率和采出程度,但同时进一步增强储层非均质性和窜流程度,引发注入水过早突破,导致含水率快速上升和无因次采液指数迅速增长,剩余油则在岩心产出端裂缝附近富集.该研究成果为低渗油藏压裂开发优化和注水开发策略制定提供理论依据与技术支撑.
Abstract:
Low-permeability oil reservoirs typically require fracturing technology for production enhancement.However,the artificial fractures created by fracturing exacerbate reservoir heterogeneity,leading to issues such as injected water channeling and rapid water breakthrough in production wells.This results in inefficient oil mobilization and low recovery rates.To investigate the impact of fractures on water-flooding development in low-permeability oil reservoirs,a physical simulation experiment was conducted.The relative permeability curves of oil and water were measured using cores with different permeabilities and fracture lengths.Based on these curves,the dimensionless liquid productivity index and dimensionless oil productivity index were calculated.A chart illustrating the influence of reservoir physical properties and fracture length on liquid and oil productivity was established,and the distribution patterns of remaining oil after water flooding were revealed by nuclear magnetic resonance imaging technology.The results indicated that fractures had a dual effect of enhancing permeability and causing channeling.In low-permeability reservoirs with poor physical properties,fractures could significantly improve flow capacity and promote the movement of oil and water.However,they also intensified reservoir heterogeneity(as indicated by an increase in the fracture-to-matrix permeability ratio,Kf/Km),making injected water prone to channeling along the fractures.This led to a sharp rise in the dimensionless liquid productivity index,with remaining oil primarily concentrated in the central part of the core and on both sides of the fracture.For reservoirs with the same physical properties,an increase in fracture length expanded the controlled range,enhanced oil displacement efficiency,and improved recovery.However,it also further intensified reservoir heterogeneity and channeling,causing premature breakthrough of injected water.This resulted in a rapid increase in water cut and a swift rise in the dimensionless liquid productivity index,with remaining oil accumulating near the fracture at the production end of the core.This study provides theoretical and technical support for optimizing fracturing development and designing water-flooding strategies in low-permeability oil reservoirs.
刊 名 油田化学 ISTICPKU
年,卷(期): 2026, 43(3)
分类号: TE357.2
机标分类号: TE371 TE122.22 P631.84
在线出版日期: 2026年10月16日