军事知识服务平台
不同高径比砂岩动态劈裂特性及破坏机制
Dynamic splitting characteristics and failure mechanisms of sandstones with different height-diameter ratios
摘要 为探究试件几何尺寸对岩石动态抗拉性能及破坏机制的影响,采用分离式霍普金森压杆试验系统,对高径比0.5~1.0区间的砂岩试件开展动态巴西劈裂试验,分析了不同高径比砂岩动态拉伸力学特性、能量耗散特征及破坏形态的规律.试验结果表明:在0.300 MPa冲击气压下,砂岩动态力学响应呈现显著的尺寸效应:随试件高径比由0.5增大至1.0,动态峰值拉伸应变由0.652%提升至1.443%,动态抗拉强度则由6.909 MPa降至4.507 MPa.随试件高径比增大,能量耗散率呈线性递减,由49.4%降低为22.0%;单位体积耗散能呈线性递减,由314.762×10-3 J/cm3降低为69.238×10-3 J/cm3.当高径比<0.9时,试件以中心主裂纹与端部楔形剪切区交织的拉剪混合破坏为主,伴随大量Ⅱ型、Ⅲ型破碎块体;当高径比≥0.9时,试件表现为中心起裂单一拉伸破坏模式.基于上述试验结果,揭示了不同高径比下砂岩动态劈裂的破坏机制:当高径比<0.9时,加载端产生的剪切应力向试样中心扩展,与中心区域的拉伸应力形成叠加效应,能量主要通过端部剪切破坏过程耗散,最终导致拉剪复合破坏;当高径比≥0.9时,剪切应力聚集在端部,能量主要集中于中心拉伸裂纹的萌生与扩展,形成以中心张拉作用为主导的应力场,导致单一拉伸破坏.本研究可为深部工程动力灾害机理及围岩安全防护设计提供理论依据.
Abstract:
To investigate the effect of specimen geometric dimensions on the dynamic tensile properties and failure mechanism of rocks,this study conducts dynamic Brazilian splitting tests on sandstone specimens with height-to-diameter ratios ranging from 0.5 to 1.0 using a split Hopkinson pressure bar(SHPB)test system.The laws of dynamic tensile mechanical properties,energy dissipation characteristics and failure modes of sandstone with different height-to-diameter ratios were analyzed.The test results show that under an impact air pressure of 0.3 MPa,the dynamic mechanical response of sandstone exhibits a significant size effect:as the specimen height-to-diameter ratio increases from 0.5 to 1.0,the dynamic peak tensile strain increases from 0.652%to 1.443%,while the dynamic tensile strength decreases from 6.909 MPa to 4.507 MPa.With the increase of height-to-diameter ratio,the energy dissipation rate decreases linearly from 49.4%to 22.0%,and the dissipated energy per unit volume also decreases linearly from 314.762×10-3 J/cm3 to 69.238×10-3 J/cm3.When the height-to-diameter ratio is less than 0.9,the specimens mainly undergo tensile-shear mixed failure characterized by the interweaving of central main cracks and end wedge-shaped shear zones,accompanied by a large number of Type Ⅱ and Type Ⅲ fragments.When the height-to-diameter ratio is greater than or equal to 0.9,the specimens exhibit a single tensile failure mode with central crack initiation.Based on the above findings,the dynamic splitting failure mechanism of sandstone under different height-to-diameter ratios is revealed.For specimens with height-to-diameter ratio<0.9,the shear stress at the loading end propagates toward the center and produces a superposition effect with the tensile stress.Energy is mainly dissipated in the end shear failure,leading to tensile-shear composite failure.For specimens with height-to-diameter ratio ≥0.9,the shear stress concentrates at the ends,and energy is mainly dissipated in the central tensile failure.A stress field dominated by central tension is formed,resulting in single tensile failure.This study can provide a theoretical basis for the dynamic disaster mechanism of deep engineering and the safety protection design of surrounding rocks.
刊 名 振动与冲击 ISTICEIPKU
年,卷(期): 2026, 45(20)
分类号: TD315
机标分类号: U416.217 TU452 TU528.01
在线出版日期: 2026年11月3日
基金项目: JQ2025E012:黑龙江省自然科学基金资助项目,