军事知识服务平台
液固耦合农用发动机水箱的声振特性研究
Research on acoustic and vibration characteristics of agricultural engine water tank based on liquid-solid interaction
摘要 [目的]针对单缸柴油发动机在标定工况下顶部水箱表面辐射噪声过大的问题,通过多信息融合方法研究水箱在 95%充水量状态下的振动与噪声特性,并识别导致共振的薄弱部位.[方法]采用基于自回归模型功率谱分割改进的经验傅里叶分解方法(AR-EFD)、同步压缩小波变换技术(SWT)以及有限元模态计算方法相结合的多信息融合策略.首先,利用 AR-EFD-SWT方法有效分割标定工况下水箱声振信号的特征频带,自适应分解不同频带的傅里叶固有频带函数分量(FIBF),并在此基础上提取影响水箱声振特性的主 FIBF分量的时频特征;随后,利用有限元模态计算方法获取液固耦合水箱的约束模态频率和振型,进而融合结构模态与其声振响应时频特征的关键信息,以确定导致水箱结构共振的薄弱部位.[结果]提取的主 FIBF 分量时频特征频率为 1 352 Hz,有限元计算的主约束模态频率为 1 350.9 Hz,两者高度吻合.通过增加压凹加强筋结构改进设计,使主约束模态频率提高近 200 Hz,有效优化了水箱的声振特性.[结论]所提多信息融合方法能够准确识别水箱结构薄弱环节,为类似液固耦合结构的减振降噪设计提供了可行思路.
Abstract:
[Objective]To address the problem of excessive surface radiated noise from the top water tank of a single-cylinder diesel engine under rated operating conditions,this study aims to investigate the vibration and noise characteristics of the tank at 95%water filling level using a multi-information fusion method,and to identify the weak locations causing structural resonance.[Methods]A multi-information fusion method is employed,combining an improved empirical Fourier decomposition based on autoregressive model power spectrum segmentation(AR-EFD),synchrosqueezed wavelet transform(SWT),and finite element modal analysis.First,the AR-EFD-SWT method is used to effectively separate the characteristic frequency bands of the tank's vibro-acoustic signals under rated conditions and adaptively decompose the Fourier intrinsic band function(FIBF)components in different frequency bands.On this basis,the time-frequency characteristics of the dominant FIBF components affecting the tank's vibro-acoustic behavior are extracted.Then,finite element modal analysis is performed to obtain the constrained modal frequencies and mode shapes of the liquid-solid coupled tank.By fusing key information from the structural modes and the time-frequency characteristics of the vibro-acoustic responses,the weak locations responsible for structural resonance are determined.[Results]The extracted dominant FIBF component has a characteristic frequency of 1 352 Hz,while the primary constrained modal frequency obtained from finite element analysis is 1 350.9 Hz,showing close agreement.After structural improvement by adding indented stiffeners,the primary constrained modal frequency is increased by nearly 200  Hz,and the vibro-acoustic characteristics of the tank are effectively optimized.[Conclusion]The proposed multi-information fusion method can accurately identify weak locations in the tank structure,providing a feasible approach for vibration and noise reduction design of similar liquid-solid coupled structures.
刊 名 中国测试 ISTICPKU
年,卷(期): 2026, 52(9)
分类号: TB9 TK422
机标分类号: S218.5 TK4 U464.138
在线出版日期: 2026年10月14日
基金项目: 12172153:国家自然科学基金CJ20241011:常州市科技计划项目26CXJH5705:江苏省研究生科研与实践创新计划项目,