考虑执行器动态劣化的时滞系统模型预测自适应控制及应用
Model predictive adaptive control and application for time-delay systems with consideration of actuator degradation
摘要
[目的]针对工业系统中执行器动态劣化与时滞效应导致的控制性能下降问题,提出一种基于模型预测控制框架的自适应滑模控制方法(model predictive adaptive sliding mode control,MPA-SMC).[方法]该方法融合MPC 的多步预测优化能力与自适应滑模的强鲁棒性,通过动态线性化方法构建含时滞与执行器劣化的等效预测模型,并设计参数在线估计器实时修正模型偏差.进一步,引入自适应滑模补偿项抑制未建模动态与扰动,结合滚动优化机制降低稳态抖振.[结果]基于 DAMADICS气动执行器平台与火电厂过热蒸汽温度控制系统的仿真实验表明:在相对正常执行器时滞 15%~35%且部分劣化的工况下,MPA-SMC的跟踪误差较传统 MPC降低 40%~52%,响应速度提升约 25%,且参数自适应收敛时间缩短 30%.[结论]该方法可为复杂工业环境提供一种经济有效的容错控制解决方案,尤其适用于执行器更换成本高昂、停机维护困难或劣化进程缓慢需维持短期运行的场景.
[Objective]To address the issue of control performance degradation caused by actuator dynamic deterioration and time-delay effects in industrial systems,an adaptive sliding mode control method based on a model predictive control(MPC)framework,named model predictive adaptive sliding mode control(MPA-SMC),is proposed.[Methods]This method combines the multi-step predictive optimization capability of MPC with the strong robustness of adaptive sliding mode.It constructs an equivalent predictive model incorporating time-delay and actuator deterioration through dynamic linearization and designs an online parameter estimator to correct model deviations in real time.Furthermore,an adaptive sliding mode compensation term is introduced to suppress unmodeled dynamics and disturbances,and a rolling optimization mechanism is incorporated to reduce steady-state chattering.[Results]Simulation experiments based on the DAMADICS pneumatic actuator platform and a superheated steam temperature control system in a thermal power plant show that under operating conditions with relative normal actuator time-delay ranging from 15%to 35%and partial deterioration,the tracking error of MPA-SMC is reduced by 40%to 52%compared to traditional MPC,the response speed is improved by approximately 25%,and the parameter adaptive convergence time is shortened by 30%.[Conclusion]This method provides an economical and effective fault-tolerant control solution for complex industrial environments,especially in scenarios where actuator replacement is costly,downtime maintenance is difficult,or the deterioration process is slow and requires maintaining short-term operation.
年,卷(期):
2026, 52(9)
分类号:
TB9
TP273
机标分类号:
TP393.08
TP273.2
TQ126.3+5
在线出版日期:
2026年10月14日