摘要
研究选取牛革、再生革及 PU 合成革3 种典型材料,开展了耐磨性、耐老化性及抗污性测试.结果表明,耐磨性方面,PU 合成革光泽度变化率仅为-6.1%,表现最佳;再生革光泽度变化率达-31.1%,最易磨损;牛革光泽度变化率为-18.4%,表现均衡.耐老化方面,PU 在光照下色差值始终低于 1,耐光性最优;牛革在高温高湿环境下拉伸强度保持率最高(≥95.5%),耐湿热性突出;在低温低湿环境下,牛革柔软度指数仅下降约0.09%,耐寒性最好.抗污性方面,PU 对人工汗液接触角达 103.6°,疏水性最强;再生革对油接触角仅62.3°,抗油污能力最弱.基于上述性能差异,提出了针对性的维护策略.
The study selected three typical materials:cattle leather,recycled leather and PU synthetic leather.Systematic tests were conducted on their wear resistance,aging resistance,and stain resistance.The results show that in terms of wear resistance,the gloss change rate of PU is only-6.1%,the best performance.The gloss change rate of recycled leather is-31.1%,the most prone to wear.The gloss change rate of cattle leather is-18.4%,balanced performance.In terms of aging resistance,the color difference value of PU under light is always lower than 1,the best aging resistance.The tensile strength retention rate of cattle leather in a high-temperature and high-humidity environ-ment is the highest(≥95.5%),outstanding moisture resistance.In a low-temperature and low-humidity environ-ment,the softness index of cattle leather only decreases by approximately 0.09%,the best cold resistance.In terms of stain resistance,PU has a contact angle of 103.6° with artificial sweat,the strongest hydrophobicity.The contact angle of recycled leather with oil is only 62.3°,the weakest oil resistance ability.Based on these performance differ-ences,the research further proposed targeted maintenance strategies.