首页
>
期刊首页
>
中国物理B(英文版)
>
2026年8期
>
Enhancement of cutoff frequency for planar anisotropic Y2Co17 by reductive diffusion method
Enhancement of cutoff frequency for planar anisotropic Y2Co17 by reductive diffusion method
摘要
With the continuous development of wide-band-gap semiconductors such as silicon carbide and gallium nitride,power conversion electronic devices are required to operate at higher frequencies.Traditional magnetic materials are limited by Snoek's limit and cannot simultaneously achieve high permeability and high cutoff frequency;however,magnetic materials with planar anisotropy can overcome Snoek's limit.This work is devoted to the preparation of high-performance soft magnetic composite materials with high permeability,high cutoff frequency,and low losses to meet the requirements of high resonant frequency and device miniaturization.The rare-earth soft magnetic material Y2Co17 was selected and prepared by the reduction diffusion method.The effects of ball milling time and ball-to-material ratio on the crystal structure and magnetic properties of Y2Co17 were investigated to determine the optimum milling conditions that enable Y2Co17 magnetic powder to exhibit excellent shape anisotropy and significantly increase the cutoff frequency.The results show that the shape anisotropy of Y2Co17 magnetic powder is optimal when the ball milling time is 4 h and the ball-to-material ratio is 10∶1,resulting in an increase in the cutoff frequency of the Y2Co17/epoxy composite to 170 MHz.This study demonstrates the promising potential of Y2Co17/epoxy composites for applications requiring high resonant frequency and device miniaturization.
年,卷(期):
2026, 35(8)
机标分类号:
TQ0
TN82
S
在线出版日期:
2026年10月21日