军事知识服务平台
电弧离子镀制备NiCoCrAlY涂层高温抗氧化性能研究
Study on High Temperature Oxidation Resistance of NiCoCrAlY Coatings Prepared by Arc Ion Plating
摘要 镍基高温合金因其优异的高温力学性能被广泛用于燃气轮机热端部件,但在950℃以上长期服役时易发生快速氧化而失效.本研究旨在利用电弧离子镀技术在IN925 镍基合金基体上沉积NiCoCrAlY涂层,并系统评估基体和涂层在950℃和1 050℃空气中的等温氧化性能与机制.通过200 h氧化动力学测试及三维共聚焦显微镜、能谱分析、X射线衍射和扫描电子显微镜等表征测试方法进行分析.结果表明:涂层表面能快速形成连续致密且附着力良好的α-Al₂O₃保护膜,使 950℃和 1 050℃下的氧化速率分别较无涂层基体降低 19.6%和 21.9%;无涂层基体表面生成Cr₂O₃、NiCr₂O₄和TiO₂等多相疏松氧化物,易剥落失效.因此,电弧离子镀制备的NiCoCrAlY涂层能显著提高IN925合金的高温抗氧化性能.
Abstract:
Nickel-based superalloys are widely used in the hot end components of gas turbines owing to their excellent high-temperature mechanical properties.However,they are prone to rapid oxidation failure during long-term service at temperatures above 950℃.This study aims to deposit a NiCoCrAlY coating on an IN925 nickel-based alloy substrate using arc ion plating technology and then systematically evaluate the isothermal oxidation performance and mechanisms of both the substrate and the coating in air at 950 and 1 050℃.The analysis is conducted through 200-hour oxidation kinetics tests and characterization methods including X-ray diffraction,scanning electron microscopy,energy dispersive spectroscopy,and three-dimensional confocal microscopy.The results indicate that the coating can rapidly form a continuous,dense,and well-adhered α-Al₂O₃ protective film on its surface,leading to a reduction in oxidation rates of 19.6%and 21.9%at 950℃and 1 050℃,respectively,compared to than of the uncoated substrate.The uncoated substrate,on the other hand,generates a loose,multi-phase oxide layer consisting of Cr₂O₃,NiCr₂O₄,and TiO₂,which is prone to spalling and failure.Therefore,the NiCoCrAlY coating deposited via arc ion plating significantly enhances the high-temperature oxidation resistance of IN925 alloy.
刊 名 真空 ISTIC
年,卷(期): 2026, 63(5)
分类号: TG174.4
机标分类号: TG174.44 TQ031.7 TB383
在线出版日期: 2026年10月16日
基金项目: N25LPY022:中央高校基本科研业务费2023M740539:中国博士后科学基金2023-BSBA-137:辽宁省自然科学基金,