军事知识服务平台
何家塔煤矿孤岛工作面冲击危险性评价及危险因素分析
Rock burst risk assessment and risk factor analysis of island working face in Hejiata Coal Mine
摘要 为了对何家塔煤矿孤岛工作面进行冲击危险性评价,采用煤岩物理力学测试及数值模拟分析相结合的实验方法,对该工作面的煤体进行强度测试以及强度指标评价,反演了开采过程中应力集中分布情况,分析了孤岛工作面形成和开采过程中煤柱应力集中情况,基于综合指数法对孤岛工作面进行冲击危险性评价,得出了何家塔煤矿在不同条件影响下的冲击地压危险状态的因素及指数.结果表明,5-2煤单轴抗压强度为13.222 MPa,弹性能指数为2.68,属于脆性较强的中硬煤;地质条件和开采条件影响下,冲击地压危险状态指数分别为0.238和0.230,无冲击危险性;随着孤岛工作面形成,煤柱应力集中峰值不断增大,从21.7 MPa增大至开采完成后的29.3 MPa,主要集中于50209工作面两侧的煤柱上,在孤岛工作面回采后其四周煤柱也出现了较为显著的应力集中现象.
Abstract:
In order to evaluate the rock burst risk of the island working face in Hejiata Coal Mine,the experimental method combining the physical and mechanical test of coal-rock and the numerical simulation analysis was adopted,the strength test and strength index e-valuation of the coal body in the working face were carried out,and the stress concentration distribution in the mining process was in-verted,the stress concentration of the coal pillar in the formation and mining process of the island working face was analyzed.Based on the comprehensive index method,the rock burst risk evaluation of the island working face was carried out,and the factors and indices of the rock burst risk state under the influence of different conditions in Hejiata Coal Mine were obtained.The results show that the uniaxi-al compressive strength of No.5-2 coal is 13.222 MPa,and the elastic energy index is 2.68,which belongs to medium-hard coal with strong brittleness;the dangerous state indices of rock burst under the influence of geological conditions and mining conditions are 0.238 and 0.230 respectively,and there is no risk of rock burst;with the formation of island working face,the peak value of coal pillar stress concentration increases continuously,from 21.7 MPa to 29.3 MPa after the completion of mining,mainly concentrated on the coal pil-lars on both sides of No.50209 working face,after the mining of island working face,there is also a significant stress concentration phe-nomenon in the surrounding coal pillars.
刊 名 能源与环保
年,卷(期): 2026, 48(7)
分类号: TD324
机标分类号: TD324 R743.33 R587.1
在线出版日期: 2026年10月19日